Publications
Journal Papers
- C. Zhu, S. Salinas-Sáenz, N. Khadka, E. Kinzel, "Microsphere photolithography with dynamic angular spectra control for metasurface fabrication," Optics Express 32(2) 2718-2731 (2024).
- T. Luo, E.C. Kinzel, M.C. Leu, “In-Situ Lock-in Thermographic Measurement of Powder Layer Diffusivity and Thickness in Laser Powder Bed Fusion,” Additive Mfct. 74 103726 (2023).
- N. Capps, C. Zhu, J.T. Goldstein, E.C. Kinzel, “Digital Glass Forming of Photonics,” Opt. Eng. 62(7) 076101 (2023).
- C. Zhu, E.C. Kinzel, “Microsphere photolithography using reusable microsphere array mask for low-cost infrared metasurface fabrication,” JVST B, 41 033601 (2023).
- N. Capps, K. Ford, J. Goldstein, E.C. Kinzel, “Printing Hollow Tubes Using Digital Glass Forming,” J. of Mfct. Sci and Eng., 145(1) 011009 (2022).
- S.M. Estalaki, C.S. Lough, R.G. Landers, E.C. Kinzel, T. Luo, “Predicting defects in laser powder bed fusion using in-situ thermal imaging data and machine learning,” Additive Mfct. 58 103008 (2022).
- T. Liu, C.S. Lough, Y.M. Ren, P.D. Christofides, E.C. Kinzel, M.C. Leu, “In-Situ Infrared Thermographic Inspection for Local Powder Layer Thickness Measurement in Laser Powder Bed Fusion,” Additive Mfct. 55 102873 (2022).
- N. Capps, J. Goldstein, K. Rettschlag, K. Sleiman, P. Jäschke, S. Kaiele, E.C. Kinzel, “Direct laser heating of the filament/substrate interface in digital glass forming,” Mfct. Lett. 31 106-109 (2022)
- C.S. Lough, T. Liu, X. Wang, B. Brown, R.G. Landers, D.A. Bristow, J.A. Drallmeier, E.C. Kinzel, “Local Prediction of Laser Powder Bed Fusion Porosity by Short-Wave Infrared Imaging Thermal Feature Porosity Probability Maps,” J. Mater. Proc. Tech. 302, 117473 (2022).
- J. Liu, I. Jasim, T. Liu, J. Huang, E. Kinzel, M. Almasri, “Off-axis microsphere photolithography patterned nanohole array and other structures on an optical fiber tip” RSC Advances 11, 25912-25920 (2021).
- C. Zhu, C. Qu, E.C. Kinzel, “Direct-write microsphere photolithography of hierarchical IR metasurfaces,” Appl. Opt. 60(24), 7122-7130 (2021).
- Y.M. Ren, Y. Zhang, Y. Ding, T. Liu, C.S Lough, M.C. Leu, E.C. Kinzel, P.D. Christofides, “Finite Element Modeling of Direct Metal Laser Solidification Process: Sensor Data Replication and Use in Defect Detection and Data Reduction via Machine Learning,” Chem. Eng. Res. Des. 171 254-267 (2021).
- T. Cullom, C. Lough, N. Altese, D. Bristow, R. Landers, B. Brown, T. Hartwig, A. Barnard, J. Blough, K. Johnson, E.C. Kinzel, “Frequency Domain Measurements of Melt Pool Recoil Force using Modal Analysis,” Sci. Rep. 11 10959 (2021).
- S.D. Golze, S. Porcu, C. Zhu, E. Sutter, P.C. Ricci, E.C. Kinzel, R.A. Hughes, S. Neretina, “Sequential Symmetry-Breaking Events as a Synthetic Pathway for Chiral Gold Nanostructures with Spiral Geometries,” Nano Lett. 21 2019-2925 (2021).
- J. Liu, I. Jasim, C. Zhu, M. Roman, J. Huang, E. Kinzel, M. Almasri, “Microsphere Photolithography Patterned Nanohole Array on an Optical Fiber” IEEE Access 9 32627-32633 (2021).
- J.M. Pappas, A.R. Thakur, E.C. Kinzel, X. Dong “Direct 3D Printing of Transparent Magnesium Aluminate Spinel Ceramics” J. Laser Appl. 33 012018 (2021).
- C. Qu, C. Zhu, E.C. Kinzel, “Modeling of microsphere photolithography” Opt. Exp. 28(26) 39700-39712 (2020).
- G.P. Szakmany, G.H. Bernstein, E.C. Kinzel, A.O. Orlov, W. Porod, “Nanoantenna-based ultrafast thermoelectric long-wave infrared detectors,” Sci. Rep. 10 13429 (2020).
- C.S. Lough, X. Wang, R.G. Landers, D.A. Bristow, J.A. Drallmeier, E.C. Kinzel, “Correlation of SWIR imaging with LPBF 304L stainless steel part properties,” Additive Manufacturing 35 101359 (2020).
- J.M. Papas, E.C. Kinzel, X. Dong, “Laser direct deposited transparent magnesium aluminate spinel ceramics,” Mfct. Lett., 24 92-95 (2020).
- C.S. Lough, L.I. Escano, M. Qu, R.G. Landers, D.A. Bristow, L. Chen, E.C. Kinzel, “In-situ Optical Emission Spectroscopy of Selective Laser Melting,” J. Manufacturing Proc. 53, 336-341 (2020).
- M.R. Haque, C. Zhu, C. Qu, E.C. Kinzel, A.R. Betz, “Experimental Investigation of Condensation and Freezing Phenomenon on Hydrophilic and Hydrophobic Titanium Nanopillared Glass Surfaces,” Heat Transfer Engineering, 42(6), 533-548 (2021).
- H. Luo, J. Qin, E. Kinzel, L. Wang, “Deep plasmonic direct writing lithography with ENZ metamaterials and nanoantenna,” Nanotechnology, 30(42) 425303 (2019).
- R. Bohm, M.R. Haque, C. Qu, E.C. Kinzel, A.R. Betz, “Accelerated freezing due to droplet pinning on a nanopillared surface,” AIP Advances 8, 125228 (2018)
- M. Hai, Q. Cheng, M Hesan, C. Qu, E.C. Kinzel M.F. Almasri, “Amorphous SixGeyO1-x-y Thin Films for Uncooled Infrared Microbolometers,” Infrared Physics and Technology 95, 227-235 (2018)
- M.R. Haque, C. Qu, E.C. Kinzel, A.R. Betz, “Droplet Growth Dynamics during Atmospheric Condensation on Nanopillar Surfaces,” Nanoscale and Microscale Thermophysical Engineering 22(4), 270-295 (2018)
- D. Peters, J. Drallmeier, D. Bristow, R. Landers, E. Kinzel, “Sensing and Control in Glass Additive Manufacturing,” Mechatronics 56, 188-197 (2018)
- J. Luo, J. Hostetler, L. Gilbert, J. Goldstein, A. Urbas, R. Landers, D. Bristow, E.C. Kinzel, “Additive manufacturing of transparent fused quartz,” Opt. Eng. 57(4), 041408 (2018)
- B.M. West, N.E. Capps, J.S. Urban, J.D. Pribe, T.J. Hartwig, T.D. Lunn, B. Brown, D.A. Bristow, R.G. Landers, E. Kinzel, “Modal analysis of metal additive manufactured parts,” Mfct. Lett. 13, 30-33 (2017).
- C. Qu, E. Kinzel, “Infrared Metasurfaces Created with Off-Normal Incidence Microsphere Photolithography,” Opt. Exp. 25(11) 12632-12639 (2017)
- J. Luo, L.J. Gilbert, D.A. Bristow, R.G. Landers, E.C. Kinzel, “Additive manufacturing of transparent soda-lime glass using a filament-fed process,” J. Mfct. Sci. Eng., 139(6) 061006 (2017).
- C. Moreno, J. Alda, E. Kinzel, G. Boreman, “Phase imaging and detection in pseudo-heterodyne scattering scanning near-field optical microscopy measurements,” Appl. Opt. Lett. 56(4) 1037-1945 (2016)
- C. Qu, E.C. Kinzel, “Polycrystalline metasurface perfect absorbers fabricated using microsphere photolithography,” Opt. Lett. 41(15) 3399-3402 (2016).
- L. Ding, J. Qin, S. Guo, T. Liu, E. Kinzel, L. Wang, “Resonant Effects in Nanoscale Bowtie Apertures,” Sci. Rep., 6, 27254 (2016)
- E.C. Kinzel, J.C. Ginn, L.A. Florence, B.A. Lail, G.D. Boreman, “Directional thermal emission from a leaky-wave frequency-selective surface,” J. Nanophotonics, 9(1) 093040, (2015).
- W.P.R. Liyange, S. Mishra, J.A. Wilson, E. Kinzel, M. Nath, “Fabrication of CdTe Nanorod Arrays over Large Area Through Patterned Electrodeposition for Efficient Solar Energy Conversion,” Solar Energy Materials and Solar Cells, 133, 260-267 (2015).
- J. Luo, H. Pan, E. Kinzel, “Additive Manufacturing of Glass,” J. Mfct. Sci. Eng. 136 061024 (2014).
- W.P.R. Liyange, J.A. Wilson, E. Kinzel, M. Nath, “Patterned Electrodeposition of CdTe Nanotube and Nanorod Arrays for Solar Cells,” Nanomaterials and Energy, 167-178 (2014).
- Y. Li, N. Zhou, E. Kinzel, X. Ren, X. Xu, “The origin of interferometric effect involving surface plasmon polariton in scattering near-field scanning optical microscopy,” Opt. Exp., 22, 2965-2972, (2014).
- J.P. Schmiedeler, B.C. Clark, E.C. Kinzel, G.R. Pennock, “Kinematic Synthesis for Infitesimally and Multiply Separated Positions Using Geometric Constraint Programming,” J. Mech. Des., 163, 034503, (2014).
- J. D’Achangel, E. Tucker, E. Kinzel, E.A. Muller, H.A. Bechtel, M.B. Martin, G. Boreman, “Near- and far-field spectroscopic imaging investigation of resonant square-loop infrared metasurfaces,” Opt. Exp., 21, 17150-17160, (2013).
- E.C. Kinzel, R.L. Brown, J.C. Ginn, B.A. Lail, B.A. Slovick, G.D. Boreman, “Design of MOM Diode-Coupled Frequency-Selective Surface,” Microwave and Optical Technology Letters, 55 489-493 (2013).
- E.C. Kinzel, J.C. Ginn, R.L. Olmon, D.J. Shelton, B.A. Lail, I. Brenner, M.B. Sinclair, M.B. Raschke, G.D. Boreman, “Phase resolved near-field mode imaging for the design of frequency-selective surfaces,” Opt. Exp., 20, 11986-11993 (2012).
- L.A. Florence, E.C. Kinzel, R.L. Olmon, J.C. Ginn, M.B. Raschke, G.D. Boreman, “Phase Resolved Near-Field Imaging of Propagating Waves in Infrared Tapered Slot Antennas,” Infrared Phys. & Tech., 55, 449-453 (2012).
- N. Zhou, E.C. Kinzel, X. Xu, “Complimentary bowtie aperture for localizing and enhancing optical magnetic field,” Opt. Lett., 36, 2764-2766 (2011).
- L.A. Florence, B.A. Slovick, E.C. Kinzel, J.A. Bean, G.D. Boreman, “Infrared Linear Tapered Slot Antenna,” IEEE Antennas and Propagation, 10, 1299-1301 (2011).
- N. Zhou, E.C. Kinzel, X. Xu, “Nanoscale ridge aperture as near-field transducer for heat-assisted magnetic recording,” Appl. Opt., 50, G42-G46, (2011).
- E.C. Kinzel, P. Srisungsitthisunti, X. Xu, “Ridge aperture antenna array as a high efficiency coupler for photovoltaic applications,” J. Photonics for Energy, 1, 017002, (2011).
- E.C. Kinzel, P. Srisungsitthisunti, Y. Li, A. Raman, X. Xu, “Extraordinary Transmission from High-Gain Nano-Aperture Based Antennas,” Appl. Phys. Lett., 96, 211116 (2010).
- E.C. Kinzel, X. Xu, “Extraordinary Infrared Transmission through Periodic Bowtie Aperture Arrays,“ Opt. Lett., 35, 992-994 (2010).
- S.M. Uppuluri, E.C. Kinzel, Y. Li, X. Xu, “Parallel optical nanolithography using nanoscale bowtie aperture array,” Opt. Exp., 18, 7369-7375 (2010).
- R. Guo, E.C. Kinzel, Y. Li, S.M. Uppuluri, A. Raman, X. Xu, “Three-dimensional mapping of optical near field of a nanoscale bowtie antenna,” Opt. Exp., 18, 4961-4971 (2010).
- E.C. Kinzel, X. Xu, “High efficiency excitation of plasmonic waveguides with vertically integrated resonant bowtie apertures,” Opt. Exp., 17, 8036-8045 (2009).
- R. Kelkar, E.C. Kinzel, X. Xu, “Laser sintering of conductive carbon paste on plastic substrate,” Opt. Eng., 48, 074301 (2009).
- E.C. Kinzel, X. Xu, “Numerical analysis of the spectral response of an NSOM measurement,” Appl. Phys. B, 93, 47-54 (2008)
- N. Murphy-DuBay, L. Wang, E.C. Kinzel, S.M.V. Uppuluri, X. Xu, “Nanopatterning using NSOM probes integrated with high transmission nanoscale bowtie aperture,” Opt. Exp., 16, 2584-2589 (2008).
- E.C. Kinzel, H.H. Sigmarsson, X. Xu, W.J. Chappell, “Laser sintering of thick-film conductors for microelectronic applications,” J. Appl. Phys., 101, 063106 (2007)
- E.C. Kinzel, J.P. Schmiedeler, G.R. Pennock, “Function Generation with Finitely Separated Precision Points Using Geometric Constraint Programming,” J. Mech. Des., 129, 1185-1190 (2007).
- B.R. Lewis, E.C. Kinzel, N.M. Laurendau, R.P. Lucht, X. Xu, “Planar laser imaging and modeling of matrix-assisted pulsed laser evaporation direct write in the bubble regime,” J. Appl. Phys., 100, 033107 (2006).
- E.C. Kinzel, X. Xu, B.R. Lewis, N.M. Laurendeau, R.P. Lucht, "Direct Writing of Conventional Thick Film Inks Using MAPLE-DW Process," J. of Laser Micro/Nanoengineering, 1, 74-78 (2006).
- E.C. Kinzel, J.P. Schmiedeler, G.R. Pennock, “Kinematic Synthesis for Finitely Separated Positions Using Geometric Constraint Programming,” J. Mech. Des., 128, 1070-1079 (2006).
- G.R. Pennock, E.C. Kinzel, “Graphical Technique to Locate the Center of Curvature of a Coupler Point Trajectory,” J. Mech. Des., 126 1000-1005 (2005)
- G.R. Pennock, E.C. Kinzel, “Path Curvature of the Single Flier Eight-Bar Linkage,” J. Mech. Des., 126 470-477 (2003).
Conference Papers
- G.P Szakmany, C. Finnan, E.C. Kinzel, A.O. Orlov, W. Porod, J. Yang, S.M. White, G.H. Bernstein, “Log-Spiral Nanoantenna-Based Long-Wave Infrared Detectors,” IEEE Sensors, Vienna, Austria, Oct. (2023).
- C. Zhu, S. Salinas-Sáenz, E. Kinzel, “Digital Micromirror Device Enabled Angle of Incidence Control for Microsphere Photolithography,” IEEE Research and Applications of Photonics in Defense Conference, Miramar Beach, FL, Sept (2023).
- N. Khadka, Y. Yang, M. Rosenberger, A. Hoffman, E. Kinzel, “Effect of Angle of Incidence on Laser-Induced Periodic Surface Structures” IEEE Research and Applications of Photonics in Defense Conference, Miramar Beach, FL, Sept (2023).
- J.T. Krantz, C.S. Lough, B. Brown, J. Yang, D.B. Go, R.G. Landers, E.C. Kinzel, “Laser Induced Breakdown Spectroscopy for In-Situ Monitoring of Laser Powder Bed Fusion Processing,” Solid Freeform Fabrication Symposium, Austin TX Aug. (2023).
- N. Capps, J. Goldstein, R. Landers, E. Kinzel, “Control of Track Morphology in Digital Glass Forming,” Solid Freeform Fabrication Symposium, Austin TX Aug. (2023).
- B. Hlifka, E Kinzel, “Distributed Optical Fiber Testing for Additive Manufacturing,” Solid Freeform Fabrication Symposium, Austin TX Aug. (2023).
- E. Kinzel, C. Finnan, C. Dong, D. Burghoff, S. White, H. Aquino, A. Orlov, W. Porod, G. Bernstein, G. Szakmany, “Thermal Transport in Thermoelectric Coupled Nanoantennas,” ASME SHTC, Washington DC (July 2023).
- N. Capps, F. Abioye, E. Kinzel, “Measurement of the Thermal Diffusivity of Glass at High Temperatures,” ASME SHTC, Washington DC (July 2023).
- G.P. Szakmany, H. Aquino, E.C. Kinzel, G.H. Bernstein, A.O. Orlov, W. Porod, D. Strobel “Directional sensing of mid-and long-wave-infrared radiation using nanoantennas,” SPIE DCS, Orlando, Apr. (2023).
- G.P. Szakmany, H. Aquino, G.H. Bernstein, D. Burghoff, C. Dong, E.C. Kinzel, A.O. Orlov, W. Porod, D. Strobel, S.M. White, “Multi-spectral and polarization-sensitive infrared sensing using nanoantennas,” SPIE Photonics West, San Francisco, Jan. (2023).
- M. Palei, N. Khadka, J. Huag, Y. Yang, M. Rosenberger, E. Kinzel, A Hoffman, “Dual-scale Engineering of Broadband Ultrablack Structures via Ultrafast Laser Processing,” IEEE Research and Applications of Photonics in Defense Conference, Miramar Beach, FL, Sept (2022).
- T. Liu, E.C. Kinzel, M.C. Leu, “In-situ Infrared Thermographic Measurement of Powder Properties in Laser Powder Bed Fusion,” Solid Freeform Fabrication Symposium, Austin, TX Aug. (2022)
- C. Zhu, E. Kinzel, “Effects of Pressure on Reusable Self-Assembled Microsphere Masks for Microsphere Photolithography,” ASME MSEC, West Lafayette, IN June 2022.
- N. Khadka, Y. Yang, J. Huag, M. Palei, M. Rosenberger, A. Hoffman, E. Kinzel, “Ultrafast Laser Texturing of Metal Surfaces: Effects of Process Parameters on Surface Reflection and the Possibility of Hierarchical Structuring,” ASME MSEC, West Lafayette, IN June 2022.
- G.P. Szakmany, E.C. Kinzel, G.H. Bernstein, D. Berghoff, C. Dong, A.O. Orlov, W. Porod, D. Strobel, S.M. White, “Beam-steering with mid- and long-wave-infrared nanoantennas,” SPIE DCS, Orlando FL Apr. (2022).
- G.P. Szakmany, G.H. Bernstein, D. Burghoff, E.C. Kinzel, A.O. Orlov, W. Porod, D. Strobel, S.M. White, “Circularly polarized, long-wave-infrared nanoantennas,” SPIE Photonics West, San Francisco, Jan. (2022).
- N. Capps, J. Goldstein, E. Kinzel, “Digital glass forming of photonics,” SPIE Photonics West, San Francisco, Jan. (2022)
-
C.S. Lough, R. Landers, D. Bristow, J. Drallmeier, E.C. Kinzel, “Experiment Based Superposition Thermal Modeling of Laser Powder Bed Fusion, Solid Freeform Fabrication Symposium, Virtual, Aug (2021).
- T. Liu, C. Lough, H. Sehet, J. Huang, E.C. Kinzel, M. Leu, “In-situ Thermographic Inspection for Laser Powder Bed Fusion,” Solid Freeform Fabrication Symposium, Virtual, Aug (2021).
- T. Liu, E.C. Kinzel, “Design of Infrared Thermoelectric Coupled Antennas,” International Applied Computational Electromagnetics Society (ACES) Symposium, Virtual, Aug (2021).
- G.P. Szakmany, A.O. Orlov, G.H. Bernstein, W. Porod, E.C. Kinzel, “Design of Infrared Thermoelectric Coupled Antennas,” IEEE Research and Applications of Photonics in Defense Conference, Virtual, Aug (2021).
- N. Capps, J.T. Goldstein, A. Hohnholz, K. Rettschlag, K. Sleiman, S. Kaierle, E.C. Kinzel, “Digital forming of glass by controlling loading and laser heating,” SPIE Photonics West, Virtual, March (2021).
- G.P. Szakmany, G.H. Bernstein, D. Burghoff, D.G. Gonzalez, E.C. Kinzel, A.O. Orlov, W. Porod, D. Strobel, S.M. White, “Wavelength selective, polarization sensitive, and uncooled infrared detectors for solar infrared imaging,” SPIE Photonics West, Virtual, March (2021).
- A. Allen, K. Johnson, J.R. Blough, A. Barnard, T. Hartwig, B. Brown, D. Soine, T. Cullom, D. Bristow, R. Landers, E. Kinzel, “Using BB-gun or Acoustic Excitation to Find High Frequency Modes in Additively Manufactured Parts,” Proc. Soc. Exp. Mech. 77-84 (2021).
- G.P. Szakmany, G.H. Bernstein, E.C. Kinzel, A.O. Orlov, W. Porod, “High Speed Nanoantenna Thermopiles for Long-Wave Infrared Detection,” IEEE Silicon Nanoelectronics Workshop, Virtual, June (2020).
- A. Abdullah, T. Liu, E. Kinzel, M. Almasri, “Uncooled SixGeyO1-x-y Microbolometer Stack for LWIR Detection,” IEEE MEMS, Vancouver, CA, Jan. (2020).
- J. Liu, I. Jasim, C. Zhu, M. Roman, E. Kinzel, J. Huang, M. Almasri, “Microsphere Photolithography Patterning of Plasmonic Sensors on Optical Fiber,” IEEE Research and Applications of Photonics in Defense Conference, Miramar Beach, FL, Aug. (2019).
- A. Abdullah, A. Koppula, O. Alkorjia, T. Liu, E. Kinzel, M. Almasri, “Metasurface Integrated Microbolometer,” IEEE Research and Applications of Photonics in Defense Conference, Miramar Beach, FL, Aug. (2019).
- N.E. Capps, J.E. Johnson, R.G. Landers, D.A. Bristow, A.N. Marchi, J.D. Bernardin, E.C. Kinzel “Comparison of Volumetric to Surface Heating for Filament-Fed Laser Heated Additive Manufacturing Glass,” ASME Heat Transfer Summer Conference, Bellevue, WA, July (2019).
- A. Allen, K. Johnson, J. Blough, A. Barnard, T. Hartwig, B. Brown, D. Soine, T. Cullom, D. Bristow, R. Landers, E. Kinzel, “Frequency Inspection of Additively Manufactured Parts for Layer Defect Identification,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. (2019).
- K. Johnson, J. Blough, A. Barnard, T. Hartwig, B. Brown, D. Soine, T. Cullom, E. Kinzel, D. Bristow, R. Landers, “Dynamic Defect Detection in AM Parts using FEA Simulation,” Solid Freeform Fabrication Symposium, Austin, TX, Aug. (2019).
- T. Cullom, R. Landers, D. Bristow, K. Johnson, J. Blough, A. Barnard, T. Hartwig, B. Brown, E. Kinzel, “In-Situ Laser Excited Frequency Response of Additive Manufactured Parts,” Solid Freeform Fabrication Symposium, Austin TX Aug. (2019).
- C. Lough, X. Wang, R. Landers, D. Bristow, J. Drallmeier, E. Kinzel, “In-situ Local Part Qualification of SLM 304L Stainless Steel through Voxel Based Processing of SWIR Imaging Data,” Solid Freeform Fabrication Symposium, Austin TX August (2019).
- B. Curtis, C. Lough, R. Landers, D. Bristow, E. Kinzel, “Fabrication of Glass to Metal Connections Using a Laser Heated Additive Approach,” ASME Int. Mfct. Sci. Eng. Conf., Erie, PA July (2019).
- J. Liu, I. Jasim, M. Roman, Y. Yang, C. Qu, J. Huang, E. Kinzel, M. Almasri, “Functional Plasmonic Fiber-Optic Based Sensors Using Low-Cost Microsphere Photolithography,” IEEE Transducers & Eurosensors XXXIII, Berlin, Germany, June (2019).
- O. Alkorjia, A. Abdullah, A. Koppula, C. Warder, T. Liu, C. Qu, C. Zhu, E. Kinzel, M. Almasri, “Metasurface Based Uncooled Microbolometer with High Fill Factor,” IEEE Transducers & Eurosensors XXXIII, Berlin, Germany, June (2019).
- I. Jasim, J. Liu, Y. Yang, C. Qu, C. Zhu, M. Roman, J. Huang, E. Kinzel, “Low-cost fabrication of functional plasmonic fiber-optic-based sensors using microsphere photolithography,” SPIE DCS, Baltimore April (2019).
- A. Koppula, A. Abdullah, T. Liu, O. Alkorjia, C. Zhu, C. Warder, S. Wadle, P. Deloach, S. Lewis, E. Kinzel, M. Almasri, “Material response of metasurface integrated uncooled silicon germanium oxide SixGeyO1-x-y infrared microbolometers,” SPIE DCS, Baltimore April (2019).
- A. Abdullah, O. Alkorjia, A. Koppula, C. Warder, T. Liu, C. Zhu, E. Kinzel, M. Almasri, “Device architecture for metasurface integrated uncooled SixGeyO1-x-y infrared microbolometers,” SPIE DCS, Baltimore, April (2019).
- J.E. Johnson, N. Capps, C. Zhu, J-H. Hsu, J. Goldstein, R. Brow, J. Huang, D. Bristow, R. Landers, E.C. Kinzel, “Direct write of photonics using a filament-fed laser-heated process,” SPIE Photonics West, San Francisco, Jan. (2019).
- C. Lough, D. Bristow, R. Landers, E. Kinzel, “In-situ Optical Emission Spectroscopy during SLM of 304L Stainless Steel,” Solid Freeform Fabrication Symposium, Austin TX August (2018).
- C. Lough, X. Wang, R. Landers, D. Bristow, E. Kinzel, “Use of SWIR Imaging to Monitor Layer-to-layer Part Quality during SLM of 304L Stainless Steel,” Solid Freeform Fabrication Symposium, Austin TX August (2018).
- J. Hostetler, J. Goldstein, R. Brow, D. Bristow, R. Landers, E. Kinzel “Fiber-Fed Printing of Free-Form Free-Standing Glass Structures,” Solid Freeform Fabrication Symposium, Austin TX August (2018).
- J. Ho, C. Lough, E. Kinzel, C. Johnson, “Additive Manufacturing of Liners for Shaped Charges,” Solid Freeform Fabrication Symposium, Austin TX August (2018).
- T. Cullom, R. Landers, D. Bristow, E. Kinzel, K. Johnson, J. Blough, A. Barnard, T. Hartwig, B. Brown, “Effects of Identical Parts on a Common Build Plate on the Modal Analysis of SLM Created Metal,” Solid Freeform Fabrication Symposium, Austin TX August (2018).
- B. Curtis, D. Peters, J. Hostetler, R. Landers, D. Bristow, E.C Kinzel, “Printing Free-Form Free-Standing Glass Structures,” ASME International Manufacturing Science and Engineering Conference, College Station, TX, Jun. (2018).
- C. Qu, E. Kinzel, “Mask-Based Microsphere Photolithography,” ASME International Manufacturing Science and Engineering Conference, College State, TX, Jun. (2018).
- B. West, N. Capps, J. Urban, T. Hartwig, B. Brown, D. Bristow, R. Landers, E. Kinzel, “Extraction of Coupling Stiffness of Specimens Printed with Selective Laser Melting using Modal Analysis,” IMAC XXVI, Orlando, Feb. (2018).
- C. Qu, C. Zhu, E. Kinzel, “Fabrication of infrared broadband polarized emitting metasurface using microsphere photolithography,” SPIE Photonics West, San Francisco, Jan. (2018).
- J. Hostetler, J. Goldstein, R. Landers, D. Bristow, E. Kinzel, “Fiber-fed laser-heated process for printing transparent glass from single mode optical fiber,” SPIE Photonics West, San Francisco, Jan. (2018)
- L. Li, C. Lough, A. Replogle, D. Bristow, R. Landers, E. Kinzel, “Thermal modeling of 304L Stainless Steel Selective Laser Melting,” Solid Freeform Fabrication Symposium, Austin TX August (2017).
- N.E. Capps, J.S. Urban, B.M. West, C. Lough, A. Replogle, T. Hartwig, B. Brown, D.A. Bristow, R.G. Landers, E.C. Kinzel, “Relating Processing of Selective Laser Melted Structures to their Material and Modal Properties,” Solid Freeform Fabrication Symposium, Austin TX August (2017).
- J. Urban, N. Capps, B. West, T. Hartwig, B. Brown, D. Bristow, R. Landers, E. Kinzel, “Towards Defect Detection in Metal SLM Parts Using Modal Analysis ‘Fingerprinting’,” Solid Freeform Fabrication Symposium, Austin TX August (2017).
- J. Hostetler, J.T. Goldstein, D. Bristow, R. Landers, E. Kinzel, “Fiber-Fed Laser-Heated Process for Printing Transparent Glass,” Solid Freeform Fabrication Symposium, Austin TX August (2017).
- C. Qu, E.C. Kinzel, “Thermal Radiation from Microsphere Photolithography Patterned Metasurfaces,” ASME Summer Heat Transfer Conference, Bellevue, WA July 9-13 (2017)
- J. Luo, J.M. Hostetler, D.A. Bristow, R.G. Landers, J.T. Goldstein, E.C. Kinzel, “Heat Transfer in Additive Manufacturing of Glass,” ASME Summer Heat Transfer Conference, Bellevue, WA July 9-13 (2017)
- R. Bohm, C. Qu, E.C. Kinzel, A. Betz, “Nanostructured surface significantly alters droplet dynamics and freezing behavior,” 2nd Thermal and Fluids Engineering Conference, Las Vegas NV April 2-5 (2017)
- J.M. Hostetler, J.T. Goldstein, A.M. Urbas, R.E. Gutierrez, T.E. Bender, C.S. Wojnar, E.C. Kinzel, “Selective Laser Sintering of Low Density, Low Coefficient of Thermal Expansion Silica Parts,” Solid Freeform Fabrication Symposium, Austin TX August (2016).
- J. Luo, T. Bender, D.A. Bristow, R.G. Landers, J.T. Goldstein, A.M. Urbas, E.C. Kinzel, “Bubble Formation in Additive Manufacturing of Borosilicate Glass,” Solid Freeform Fabrication Symposium, Austin TX August (2016).
- J.D. Pribe, B.M. West, M.L. Gegel, T. Hartwig, T. Lunn, B. Brown, D.A. Bristow, R.G. Landers, E.C. Kinzel, “Modal Response as a Validation Technique for Metal Parts Fabricated with Selective Laser Melting,” Solid Freeform Fabrication Symposium, Austin TX August (2016).
- J.D. Pribe, S.C. Thandu, Z. Yin, E.C. Kinzel, “Toward DMD illuminated spatial-temporal modulated thermography,” SPIE DCS, Baltimore MD April (2016).
- T. Liu, C. Qu, M. Almasri, E.C. Kinzel, “Design and Analysis of Frequency-Selective Surface Enabled Microbolometers,” SPIE DCS, Baltimore MD April (2016)
- J. Luo, L.J. Gilbert, D.C. Peters, D.A. Bristow, R.G. Landers, J.T. Goldstein, A.M. Urbas, E.C. Kinzel, “Bubble formation in additive manufacturing of glass,” SPIE DCS, Baltimore MD April (2016)
- J. Luo, L.J. Gilbert, D.A. Bristow, R.G. Landers, J.T. Goldstein, A.M. Urbas, E.C. Kinzel, “Additive manufacturing of glass for optical applications,” SPIE Photonics West, San Francisco, Feb. (2016).
- J. Luo, L.J. Gilbert, C. Qu, B. Morrow, D.A. Bristow, R.G. Landers, J. Goldstein, A. Urbas, E.C. Kinzel, “Solid Freeform Fabrication of Transparent Fused Quartz Using a Filament Fed Process”, Solid Freeform Fabrication, Austin TX (2015).
- J. Luo, L.J. Gilbert, C. Qu, J. Wilson, D.A. Bristow, R.G. Landers, E.C. Kinzel, “Wire-Fed Additive Manufacturing of Transparent Glass Parts”, ASME Int. Mfct. Sci. Eng. Conf., Charlotte, NC (2015).
- J. Luo, H. Pan, E.C. Kinzel, “Additive Manufacturing of Glass,” IMECE 2014, Montreal (2014).
- J.S. Wilson, W.P.R. Liyanage, M. Gegel, M. Nath, E.C. Kinzel, “Scalable Nanomanufacturing of Metasurfaces,” IMECE 2014, Montreal (2014).
- E.C. Kinzel, “Design of a Frequency-Selective Surface Strain Sensor,” IEEE Antennas and Propagation Conference, Memphis (2014).
- E.C. Kinzel, B. Slovick, J.C. Ginn, B.A. Lail, and G. Boreman, “Thermal-Electromagnetic Analysis of Infrared Antennas,” AIAA Conference, Atlanta (2014).
- D. Pieper, K.M. Donnell, M.T. Ghasr, E.C. Kinzel, “Integration of microwave and thermographic NDT methods for corrosion detection,” 40th Ann. Rev. of Prog. In Quant. Non. Dest. Test. (2014).
- E.C. Kinzel, J.C. Ginn, L.A. Florence, G. Boreman, B.A. Lail, G. Boreman, “Directional thermal emission from a leaky-wave frequency selective surface,” SPIE Optics and Photonics, San Diego, (2013).
- E.C. Kinzel, J.C. Ginn, B.A. Lail, M.B. Raschke, G. Boreman, “Numerical modeling of scattering type scanning near-field optical microscopy,” SPIE Optics and Photonics, San Diego, (2013).
- F. Manene, B. Lail, E. Kinzel, “Waveguiding of Surface Phonon Polariton,” APS/URSI, Orlando, FL, (2013).
- J.P Schmiedeler, B.C. Clark, E.C. Kinzel, G. Pennock, “Kinematic Synthesis for Infinitesimally and Multiply Separated Positions Using Geometric Constraint Programming,” ASME IDETC/CIE, Washington (2011).
- E.C. Kinzel, P. Srisungsitthisunti, X. Xu, "Ridge aperture antenna array as a high efficiency coupler for photovoltaic applications," SPIE Optics and Photonics, San Diego, (2010).
- H.H. Sigmarsson, E.C. Kinzel, W.J. Chappell, X. Xu, "Selective Laser Sintering of Multilayer, Multimaterial Circuit Components," IEEE Microwave Theory and Techniques Symposium, San Francisco, (2006).
- E.C. Kinzel, X. Xu, H.H. Sigmarsson, W.J. Chappell, “Heat Transfer in Laser Sintering of Thick-Film Microelectronics,” ASME IMECE2005, Orlando (2005).
- H.H. Sigmarsson, E.C. Kinzel, W.J. Chappell, X. Xu, "Selective Laser Sintering of Patch Antennas on FR4," IEEE Antennas and Propagation Conference, Washington D.C (2005).
- H.H. Sigmarsson, E.C. Kinzel, W.J. Chappell, X. Xu, "Selective Laser Sintering of Microwave Components," European Microwave Conference, Paris, France (2005).
- A. Jauhola, E. Kinzel, D. Redding, N. Hunter, "Modal Parameters for a Flat Plate Supported by an Oil Film," International Modal Analysis Conference, Orlando, (2003).